Placeholder Kent Country Classic MKII Freestanding Wood Heater – Hot Things - Barbecues, Heaters, Outdoor Kitchens

Air Conditioning Split Systems Soon Available.

Kent Country Classic MKII Wood heater

Description

Kent Country Classic MKII Freestanding Wood Heater

Kent wood heaters are the ultimate heating solution for your home. Kent's range of high-quality and efficient wood heaters are designed to provide warmth, comfort and style to any interior. With cutting-edge heating technology and sleek designs, Kent Country Classic MKII wood heaters are perfect for any home decor. Plus, their eco-friendly features ensure clean and healthy air in your home. Shop now and experience the beauty and warmth of a Kent wood heater, the perfect addition to your home.

A generous sized convection heater with a stunning modern design that provides ample heat for all Australian homes. This contemporary heater has a large window area giving your room a greater ambient glow as the wood burns inside. The variable speed electric fan is discreetly attached to the back of the heater.

This heater requires a six inch flue kit

Flue kits are extra Click Here to see flues or Contact us Here to discuss your needs.

Kent Country Classic MKII Wood heater

DIMENSIONS & CLEARANCES

Height (mm): - 840mm
Depth (mm): - 567mm
Width (mm): - 737mm

Rear Of Heater To Flue Centre - (mm) 199mm
Flue Diameter - 6 Inch
Rear Wall Clearance - 200mm
Hearth Clearance - 300mm
Corner Clearance - 100mm
Side Wall Clearance - 325mm

SPECIFICATIONS OF KENT COUNTRY CLASSIC MKII

Efficiency: - 76%
Heating Type: - Freestanding Wood Heater
Burn Time: - Up to 8.5 hours
Recommended Hearth: - Maxiheat 1.2 x 1.2m Hearth
Emissions: - 0.7g/kg
Fan: - Included
Heating Style: - Convection
Fuel: - Hardwood
Heating Capacity Output: - Heats up to 300m2
Colour: - Metallic Black

INSTALLATION GUIDE

LOCATION

Select a location for your Kent Country Classic MKII Wood heater with great care.

  • Do not place your heater in areas of high traffic, near furniture or draperies.
  • Check that the intended location will not interfere with ceiling joists, rafters, valleys and ridges.

HEARTH REQUIREMENTS

If your Kent Country Classic MKII is to be installed on carpet, timber or any other combustible material, you must place a hearth (also known as a floor protector) underneath the heater. Please observe the following:

  • The hearth must consist of at least a 6 mm thick sheet of compressed fibre cement sheet with a thermal conductivity not greater than 0.33 W/m°K.
  • It is not recommended that you make your own hearth.
  • The hearth and heater assembly must be placed on a firm and level surface.

HEARTH CLEARANCES

It is necessary to ensure that the heater is positioned on the hearth so that the requirements in the diagrams and table below are observed.

The front of the hearth should extend past the front of the heater by 282 mm. The side of the hearth should extend past the firebox opening by a minimum of 200 mm on each side.

HEATER CLEARANCES

It is vital that the heater be installed at the proper distance from combustible surfaces like wood, gyprock and curtains. These minimum distances, which you need to observe for your particular heater, are stated below. The diagrams show both parallel and corner installations. Failure to maintain these minimum distances may result in a fire for which your insurer may refuse to cover.

REDUCED CLEARANCES

These clearances can be reduced with proper heat shielding. A non-combustible surface is placed between the heater and the combustible wall. It is vital that an unobstructed airflow be maintained between the two surfaces to remove excess heat.

Product form

Free pickup in our shop(s)

1 in stock

$2,295.00 Incl. GST

    Description

    Kent Country Classic MKII Freestanding Wood Heater

    Kent wood heaters are the ultimate heating solution for your home. Kent's range of high-quality and efficient wood heaters are designed to provide warmth, comfort and style to any interior. With cutting-edge heating technology and sleek designs, Kent Country Classic MKII wood heaters are perfect for any home decor. Plus, their eco-friendly features ensure clean and healthy air in your home. Shop now and experience the beauty and warmth of a Kent wood heater, the perfect addition to your home.

    A generous sized convection heater with a stunning modern design that provides ample heat for all Australian homes. This contemporary heater has a large window area giving your room a greater ambient glow as the wood burns inside. The variable speed electric fan is discreetly attached to the back of the heater.

    This heater requires a six inch flue kit

    Flue kits are extra Click Here to see flues or Contact us Here to discuss your needs.

    Kent Country Classic MKII Wood heater

    DIMENSIONS & CLEARANCES

    Height (mm): - 840mm
    Depth (mm): - 567mm
    Width (mm): - 737mm

    Rear Of Heater To Flue Centre - (mm) 199mm
    Flue Diameter - 6 Inch
    Rear Wall Clearance - 200mm
    Hearth Clearance - 300mm
    Corner Clearance - 100mm
    Side Wall Clearance - 325mm

    SPECIFICATIONS OF KENT COUNTRY CLASSIC MKII

    Efficiency: - 76%
    Heating Type: - Freestanding Wood Heater
    Burn Time: - Up to 8.5 hours
    Recommended Hearth: - Maxiheat 1.2 x 1.2m Hearth
    Emissions: - 0.7g/kg
    Fan: - Included
    Heating Style: - Convection
    Fuel: - Hardwood
    Heating Capacity Output: - Heats up to 300m2
    Colour: - Metallic Black

    INSTALLATION GUIDE

    LOCATION

    Select a location for your Kent Country Classic MKII Wood heater with great care.

    • Do not place your heater in areas of high traffic, near furniture or draperies.
    • Check that the intended location will not interfere with ceiling joists, rafters, valleys and ridges.

    HEARTH REQUIREMENTS

    If your Kent Country Classic MKII is to be installed on carpet, timber or any other combustible material, you must place a hearth (also known as a floor protector) underneath the heater. Please observe the following:

    • The hearth must consist of at least a 6 mm thick sheet of compressed fibre cement sheet with a thermal conductivity not greater than 0.33 W/m°K.
    • It is not recommended that you make your own hearth.
    • The hearth and heater assembly must be placed on a firm and level surface.

    HEARTH CLEARANCES

    It is necessary to ensure that the heater is positioned on the hearth so that the requirements in the diagrams and table below are observed.

    The front of the hearth should extend past the front of the heater by 282 mm. The side of the hearth should extend past the firebox opening by a minimum of 200 mm on each side.

    HEATER CLEARANCES

    It is vital that the heater be installed at the proper distance from combustible surfaces like wood, gyprock and curtains. These minimum distances, which you need to observe for your particular heater, are stated below. The diagrams show both parallel and corner installations. Failure to maintain these minimum distances may result in a fire for which your insurer may refuse to cover.

    REDUCED CLEARANCES

    These clearances can be reduced with proper heat shielding. A non-combustible surface is placed between the heater and the combustible wall. It is vital that an unobstructed airflow be maintained between the two surfaces to remove excess heat.

    Recently viewed products

    Send us a message!

    Send us a message and we will email you back as soon as we can.

    © 2024 Hot Things - Barbecues, Heaters, Outdoor Kitchens, Powered by Shopify

      • Apple Pay
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Union Pay
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account